Articles
| Open Access |
https://doi.org/10.37547/ajast/Volume05Issue01-05
Change the hardness of the alloy based on changing the composition of aluminum alloys
Abstract
This article analyzes the influence of germanium on aluminum alloys. The article examines how germanium oxide is introduced into its composition during melting of aluminum-manganese, aluminum-copper, aluminum-magnesium alloys and its hardness changes. Based on the results of the conducted research, the conclusions and suggestions of the authors are presented at the end of the article.
Keywords
Hardness, alloying, aluminum
References
Sarvar, T., Nodir, T., Mardonov, U., Saydumarov, B., Kulmuradov, D., & Boltaeva, M. (2024). EFFECTS OF GERMANIUM (GE) ON HARDNESS AND MICROSTRUCTURE OF AL-MG, AL-CU, AL-MN SYSTEM ALLOYS. International Journal of Mechatronics and Applied Mechanics, (16), 179-184.
Sarvar, T., Nodir, T., Shohista, S., Anvar, T., & Mashhura, M. (2024). DEVELOPMENT OF A MATHEMATICAL MODEL OF THE EFFECT OF LITHIUM ON THE WEAR RESISTANCE PROPERTIES OF ALUMINUM-LITHIUM ALLOYS. American Journal Of Applied Science And Technology, 4(01), 37-41.
Tan, C. F., & Radzai, S. M. (2009). Effect of hardness test on precipitation hardening aluminium alloy 6061-T6. Chiang Mai Journal of Science, 36(3), 276-286.
Asgharzadeh, A., Nazari Tiji, S. A., Esmaeilpour, R., Park, T., & Pourboghrat, F. (2020). Determination of hardness-strength and-flow behavior relationships in bulged aluminum alloys and verification by FE analysis on Rockwell hardness test. The International Journal of Advanced Manufacturing Technology, 106, 315-331.
Tursunbaev, S., Turakhodjaev, N., Odilov, F., Mardanokulov, S., & Zokirov, R. (2023). Change in wear resistance of alloy when alloying aluminium alloy with germanium oxide. In E3S Web of Conferences (Vol. 401, p. 05001). EDP Sciences.
Sarvar, T., Nodir, T., & Sharofuddin, M. (2022). Changes in the Hardness of Aluminum Alloys in the Influence of Lithium. Eurasian Journal of Engineering and Technology, 8, 56-60.
Kim, K. C., Park, S. H., Na, M. Y., Chang, H. J., Kim, W. T., Mattern, N., ... & Kim, D. H. (2015). Formation of nano-porous GeOx by de-alloying of an Al–Ge–Mn amorphous alloy. Scripta Materialia, 104, 49-52.
Tursunbaev, S., Turakhodjaev, N., Saidxodjayeva, S., & Hudoykulov, S. (2023). INFLUENCE OF ALLOYING ELEMENTS ON ALUMINUM ALLOYS. International Journal of Advance Scientific Research, 3(09), 46-50.
Davis, R. M., & Koch, C. C. (1987). Mechanical alloying of brittle components: silicon and germanium. Scripta metallurgica, 21(3), 305-310.
Tursunbaev, S., Turakhodjaev, N., Mardonakulov, S., & Hudoykulov, S. (2023). EFFECT OF GERMANIUM OXIDE ON ALUMINUM ALLOY STRUCTURE. American Journal of Applied Science and Technology, 3(09), 10-13.
Tursunbaev, S., Umarova, D., Kuchkorova, M., & Baydullaev, A. (2022, June). Study of machining accuracy in ultrasonic elliptical vibration cutting of alloyed iron alloy carbon with a germanium. In Journal of Physics: Conference Series (Vol. 2176, No. 1, p. 012053). IOP Publishing.
Hill, R., Storåkers, B., & Zdunek, A. B. (1989). A theoretical study of the Brinell hardness test. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 423(1865), 301-330.
Ponnusamy, P., Rahman Rashid, R. A., Masood, S. H., Ruan, D., & Palanisamy, S. (2020). Mechanical properties of SLM-printed aluminium alloys: a review. Materials, 13(19), 4301.
Tursunbaev, S., Turakhodjayev, N., Mardanokulov, S., & Tashbulatov, S. (2023). Influence of germanium oxide on the mechanical properties of aluminum alloy. Eurasian Journal of Engineering and Technology, 16, 91-94.
Sarvar, T. (2022). Changes in its Wear Resistance When Alloying Aluminum Alloys with Lithium. Texas Journal of Engineering and Technology, 12, 32-36.
Sarvar, T., Nodir, T., Shoxista, S., Ruslan, Z., & Sharofuddin, M. (2022). The effect of lithium fluoride compound on slag decomposition in the process of casting aluminum prepared details. Asian Journal Of Multidimensional Research, 11(7), 46-50.
Tashbulatov, S., Tursunbaev, S., Omonov, F., Zokirov, R., & Shaxzod, S. (2024, October). ANALYSIS OF SLAG FORMATION AND THEIR CHARACTERISTICS DURING MELTING OF FERROUS METAL ALLOYS. In Uz Conferences (Vol. 1, No. 1).
Xu, R., Zhao, H., Li, J., Liu, R., & Wang, W. K. (2006). Microstructures of the eutectic and hypereutectic Al–Ge alloys solidified under different pressures. Materials Letters, 60(6), 783-785.
Article Statistics
Copyright License
Copyright (c) 2025 Tursunbaev Sarvar, Dovulov Shukhrat, Tadjiyev Nuritdin, Murodov Sobirjon, Turakhujaeva Azizakhon; Rakhmonova Mokhinur
This work is licensed under a Creative Commons Attribution 4.0 International License.