In this research paper, the authors investigated the wear resistance of one of the mechanical properties, studying the change in its wear resistance as a result of the action of lithium fluoride on aluminum alloys. Based on the results obtained, a dependence graph was developed, on the basis of which a mathematical model of the effect of lithium on the edibility property was developed.
DEVELOPMENT OF A MATHEMATICAL MODEL OF THE EFFECT OF LITHIUM ON THE WEAR RESISTANCE PROPERTIES OF ALUMINUM-LITHIUM ALLOYS
DOI:
Keywords:
Aluminum
lithium
mathematical model
Abstract
References
Tursunbaev, S., Turakhodjaev, N., Turakhujaeva, S., Ozodova, S., Hudoykulov, S., & Turakhujaeva, A. (2022, August). Reduction of gas porosity when alloying A000 grade aluminum with lithium fluoride. In IOP Conference Series: Earth and Environmental Science (Vol. 1076, No. 1, p. 012076). IOP Publishing.
Cunat, P. J. (2004). Alloying elements in stainless steel and other chromium-containing alloys. Euro Inox, 2004, 1-24.
Sarvar, T., Nodir, T., Shoxista, S., Ruslan, Z., & Sharofuddin, M. (2022). The effect of lithium fluoride compound on slag decomposition in the process of casting aluminum prepared details. Asian Journal Of Multidimensional Research, 11(7), 46-50.
Ma, Z., Zhong, T., Sun, D., Qian, B., Turakhodjaev, N., Betsofen, S., & Wu, R. (2023). Microstructure and Anisotropy of Mechanical Properties of Al-3Li-1Cu-0.4 Mg-0.1 Er-0.1 Zr Alloys Prepared by Normal Rolling and Cross-Rolling. Metals, 13(9), 1564.
Yang, Z., Ji, P., Wu, R., Wang, Y., Turakhodjaev, N., & Kudratkhon, B. (2023). Microstructure, mechanical properties and corrosion resistance of friction stir welded joint of Al–Mg–Mn–Zr–Er alloy. International Journal of Materials Research, 114(1), 65-76.
Turakhodjaev, N., Odilov, F., Tursunbaev, S., & Kuchkorova, M. (2021). Development of technology for increasing endurance when crushing the working parts of shredders (crushers) in conditions of increased friction. Техника и технологии машиностроения, 71-76.
Yang, W. A. N. G., ZHANG, S., WU, R. Z., TURAKHODIAEV, N., HOU, L. G., ZHANG, J. H., & BETSOFEN, S. (2021). Coarsening kinetics and strengthening mechanisms of core–shell nanoscale precipitates in Al–Li–Yb–Er–Sc–Zr alloy [J]. Journal of Materials Science & Technology, 61(2), 197-203.
Turakhodjaev, N., Tursunbaev, S., Hudoykulov, S., & Ozodova, S. (2022). Effect of LiF compound on gas porosity in aluminum alloy. In Техника и технологии машиностроения (pp. 13-17).
Турсунбаев, С. А. (2019). Особенности обработки деталей из магнитотвердых материалов. ТЕХНИКА И ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯ, 23-27.
Saidova, M., Alimova, F., Tursunbaev, S., Kulmuradov, D., & Boltaeva, M. (2023, December). Influence of the shape of the disc slots of the seeder on the suction force of the vacuum for precise sowing of seeds. In IOP Conference Series: Earth and Environmental Science (Vol. 1284, No. 1, p. 012014). IOP Publishing.
Tursunbaev, S., Turakhodjayev, N., Mardanokulov, S., & Tashbulatov, S. (2023). Influence of germanium oxide on the mechanical properties of aluminum alloy. Eurasian Journal of Engineering and Technology, 16, 91-94.
Тураходжаев, Н. Д., Ташбулaтов, Ш. Б., Турсунбаев, С. А., Турсунов, Т. Х., & Абдуллаев, Ф. К. (2020). Исследование анализа извлечения меди и алюминия из шлаков в дуговой печи постоянного тока. In Техника и технологии машиностроения: материалы IX Междунар. науч.-техн. конф.(Омск, 8–10 июня 2020 г.).–Омск: Изд-во ОмГТУ (pp. 68-70).
Tursunbaev, S., Turakhodjaev, N., Odilov, F., Mardanokulov, S., & Zokirov, R. (2023). Change in wear resistance of alloy when alloying aluminium alloy with germanium oxide. In E3S Web of Conferences (Vol. 401, p. 05001). EDP Sciences.
Tursunbaev, S., Turakhodjaev, N., Turakhujaeva, S., Ozodova, S., Hudoykulov, S., & Turakhujaeva, A. (2022, August). Reduction of gas porosity when alloying A000 grade aluminum with lithium fluoride. In IOP Conference Series: Earth and Environmental Science (Vol. 1076, No. 1, p. 012076). IOP Publishing.
Tursunbaev, S., Ashirbaev, A., Xalimov, M., & Tashimov, N. (2023). The effect of the amount of lithium in aluminum lithium alloys on the property of fluidity. In E3S Web of Conferences (Vol. 417, p. 04010). EDP Sciences.
Tursunbaev, S., Turakhodjaev, N., Odilov, F., Mardanokulov, S., & Zokirov, R. (2023). Change in wear resistance of alloy when alloying aluminium alloy with germanium oxide. In E3S Web of Conferences (Vol. 401, p. 05001). EDP Sciences.
Tursunbayev, S., Turakhodjayev, N., Mardanokulov, S., Zokirov, R., & Odilov, F. (2023). The effect of lithium on the mechanical properties of alloys in the Al-Li system. In E3S Web of Conferences (Vol. 390). EDP Sciences.
18. Ma, Z., Zhong, T., Sun, D., Qian, B., Turakhodjaev, N., Betsofen, S., & Wu, R. (2023). Microstructure and Anisotropy of Mechanical Properties of Al-3Li-1Cu-0.4 Mg-0.1 Er-0.1 Zr Alloys Prepared by Normal Rolling and Cross-Rolling. Metals, 13(9), 1564.