Theoretical Justification Of The Interaction Between Soil And The Ring Roller Of A Machine For Preparing Ridge Beds For Carrot Planting | American Journal Of Agriculture And Horticulture Innovations

Authors

Sevara Muxiddinovna Alikulova

PhD Candidate (Doctoral Researcher) Karshi State Technical University, Karshi, Uzbekistan
Ravshanov Hamqroqul Amirqulovich

Doctor of Technical Sciences, Professor, Karshi State Technical University, Uzbekistan
Chuyanov Dustmurod Shodmonovich

Doctor of Technical Sciences, Professor of the Karshi State Technical University, Uzbekistan
Irgashev Dilmurod Begmurodovich

PhD in Technical Sciences, Associate Professor, Karshi State Technical University, Uzbekistan
Kurbanov Sherzod Baxtiyorovich

PhD in Technical Sciences, Associate Professor, Karshi State Technical University, Uzbekistan

DOI:

https://doi.org/10.37547/ajahi/Volume06Issue05-06

Keywords:

Carrot cultivation soil tillage working bodies

Abstract

This article comprehensively examines the scientific substantiation of the parameters of working bodies of a machine designed to prepare soil for carrot cultivation. In agriculture, high-quality soil preparation prior to carrot sowing is one of the key factors in achieving high yields. For this reason, the design of working bodies of soil-tillage machines, their geometric dimensions, and the optimal selection of operating modes are of particular importance.

During the research, the dependence of working-body width, depth, operating angle, and travel speed on the physical and mechanical properties of the soil (moisture content, bulk density, and mechanical composition) was analysed. In addition, the resistance forces and energy consumption generated as a result of the interaction between the working bodies and the soil were theoretically evaluated.

The analyses established that optimising the parameters of the working bodies improves the quality of soil crumbling, brings its structure to a uniform condition, and reduces excessive energy expenditure. The approach proposed in the article makes it possible to select working-body parameters in accordance with the specific soil conditions, thereby increasing the operational efficiency of the machine implement, reducing fuel consumption, and promoting the rational use of technical resources.

The results obtained are of significant scientific and practical importance for improving carrot cultivation technologies and for the development of modern energy-efficient agricultural machinery.

References

Goryachkin V.P. Theory of Soil-Tillage Machines. — Moscow: Мashinostroenie, 1968. — 412 p.

Zelenin A.N. Fundamentals of Soil Destruction by Mechanical Methods. — Moscow: Mashinostroenie, 1968.

Bernacki H., Haman J. Theory of Agricultural Machinery. — Warsaw, 1972.

Qodirov I.A., Toshmatov N.U. Theory of Agricultural Machines. — Tashkent: Fan, 2015.

Fundamentals of Soil Science and Agricultural Chemistry. — Tashkent: O‘zbekiston, 2018. — 320 p.

GOST 24057-88. Agricultural Machinery. Methods of Experimental Evaluation.

Ravshanov, K., Fayzullaev, K., Ismoilov, I., Irgashev, D., Mamatov, S., & Mardonov, S. (2020, July). The machine for the preparation of the soil in sowing of plow crops under film. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012138). IOP Publishing.

Fayzullaev K. et al. Study on mechanisms of tillage for melon cultivation under the film //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 304. – С. 03012.

Fayzullayev K. et al. Raking plates of the combination machine's subsoiler //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 264. – С. 04039.

Irgashev D. et al. Placement of working bodies on the frame of the tool plow-ripper //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 390. – С. 01036.

Irgashev D., Mamadiyorov O., Xidirov M. Technical analysis of the disk working bodies that work the soil and them working between the garden row //Science and innovation. – 2022. – Т. 1. – №. A5. – С. 150-155.

Irgashev D. B. Basing the Constructional Parameters of the Plug-Softener that Works Between the Garden Rows. – 2024.

Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.

Irgashev Dilmurod Begmurodovich I. D. B. Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow //Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow. – 2025. – Т. 7. – №. 3. – С. 168-175.