Skip to main content
editor@theusajournals.com | Oscar Publishing Services Journal Home
Login

American Journal of Applied Science and Technology

Peer Reviewed | Open Access | E-ISSN: 2771-2745
Published Article

EXPERIMENTAL INVESTIGATIONS OF A DEVICE FOR USEFUL HEAT UTILIZATION OF DRILLING EQUIPMENT INTERNAL COMBUSTION ENGINE

EXPERIMENTAL INVESTIGATIONS OF A DEVICE FOR USEFUL HEAT UTILIZATION OF DRILLING EQUIPMENT INTERNAL COMBUSTION ENGINE

Authors

  • Juraev R.U.
    DSc.prof., Navoi State Mining and Technological University, Navoi, Uzbekistan
  • Raikhanov Sh.Z.
    Almalyk branch of the Tashkent State Technical University, Almalyk, Uzbekistan

DOI:

https://doi.org/10.37547/ajast/Volume03Issue08-07

Keywords:

Diesel power plant heat thermal energy

Abstract

In the beneficial use of the heat of the internal combustion engine of drilling equipment has great scientific and practical importance.

The article presents a heat exchange device for the beneficial use of thermal energy, which occurs during operation of an engine with an internal combustion chamber of a diesel power plant used in drilling operations and experimental studies to increase the efficiency of work using a thermoelectric generator.

References

Juraev R.U., Merkulov M.V. On the possibility of using vortex tubes when drilling exploration wells. Izvestiya Vuzov. Geology and exploration. Moscow. 2013. №3. pp.76-78.

Juraev R.U., Merkulov M.V. Normalization of the temperature regime of wells during drilling with air purge // Navoiy , “A. Navoiy ", 2016.

Golovin S.V. Improving the efficiency of exploratory drilling by optimizing the heat recovery systems of autonomous energy complexes // Diss . …cand. tech . Sciences. - Moscow, 2016. - 174 p.

Juraev R.U., Merkulov M.V. Utilization of the heat of the internal combustion engine of the compressor drive and excess air during drilling of exploration wells with air purge. // Mining Information and Analytical Bulletin - GIAB, No. 7. Moscow. 2016. pp. 186-192.

Dzhuraev R.U., Merkulov M.V., Kosyanov V.A., Limitovsky A.M. Improving the efficiency of rock cutting tools when drilling wells with air purging based on the use of a vortex tube. // Mining journal. – Ed. « Ore And metals ." - Moscow , 2020. - No. 12 . C . 71-73. DOI: 10.17580/gzh.2020.12.16

Merkulov M.V., Djuraev RU, Leontyeva OB, Makarova GY, Tarasova YB Simulation of thermal power on bottomhole on the bases of experimental studies of drilling tool operation // International Journal of Emerging Trends in Engineering Research. Volume 8, No.8 , 2020 . – pp . 4383-4389.

Merkulov M.V. Kosyanov V.A. Heat engineering and heat supply for exploration works: Textbook. - Volgograd, In-folio, 2009. - 272 p.

Neskoromnykh V.V. Destruction of rocks during geological exploration. – Krasnoyarsk, SFU, 2015. – 396 p.

Toshov Zh.B. Ways of optimizing flushing units of rock cutting drilling tools // Mining Journal. - Moscow, 2016. - No. 2. - S. 24-27.

Vlasyuk V.I., Budyukov Yu.E., Spirin V.I. Technical means and technologies for improving the quality of drilling wells. - Tula: Grif and K, 2013. - 176 p.

Kobelev N.S. Reducing the energy intensity of compressed air production // Industrial Energy. - Moscow, 1998. - No. 7. - S. 38-41.

Kulikov V.V. The power spent on the destruction of the bottom of the well // Petroleum Engineer. - Moscow, 2013. - No. 1. - S. 53-56.

Minyaev Yu.N. Energy inspection of the pneumatic facilities of industrial enterprises. Tutorial. - Yekaterinburg: UGGGA Publishing House, 2003. - 151 p.

Ergashovich Y. H., Narmuratovna X. D. ORALIQ VA OXIRGI SOVUTGICHLARINING ISSIQLIK ALMASHINUVI SIRTLARIGA BIRIKMALARNING KOMPRESSOR SOVUTISH SAMARADORLIGIGA TA'SIRI //Ta’lim fidoyilari. – 2022. – Т. 17. – №. 4. – С. 43-46.

Ergashovich Y. H., Narmuratovna X. D. KOMPRESSORGA KIRAYOTGAN YUQORI HAVO HARORATINING KOMPRESSOR SAMARADORLIGIGA TA'SIRINI O'RGANISH //Ta’lim fidoyilari. – 2022. – Т. 17. – №. 4. – С. 40-42.

Муратов Г. Г. и др. Современные внедрения для предохранения узлов конвейера в шахте АО" Узбеккумир" //Научные исследования и разработки 2018. – 2018. – С. 524-525.