Skip to main content
editor@theusajournals.com | Oscar Publishing Services Journal Home

American Journal of Applied Science and Technology

Peer Reviewed | Open Access | E-ISSN: 2771-2745
Published Article

Effects of Harrow Tooth Length and Mass Per Tooth on The Performance of a Harrow-Roller Implement

Effects of Harrow Tooth Length and Mass Per Tooth on The Performance of a Harrow-Roller Implement

  • Abdusalim Tokhtakuziev
    Doctor of Technical Sciences, Professor, Scientific Research Institute of Agricultural Mechanization, Uzbekistan
  • Baxtiyar Usenbayevich Nurabaev
    Candidate of Technical Sciences, Associate Professor, Karakalpakstan Institute of Agriculture and Agrotechnologies, Uzbekistan
  • Azatbay Quwanishbay uli Nietullaev
    PhD Researcher, Scientific Research Institute of Agricultural Mechanization, Uzbekistan

This study presents experimental results on the effects of harrow tooth length and mass per tooth on the agrotechnical and energy performance of a harrow-roller. The evaluated indicators included tillage depth and its standard deviation, degree of soil crumbling, standard deviation of field-surface irregularity heights, and specific draft resistance. The results showed that, under the tested field conditions and travel speeds, a harrow tooth length of 140–160 mm and a mass per tooth of 2.10–2.25 kg provided the required performance.

Қишлоқ хўжалик экинларини парваришлаш ва махсулот етиштириш бўйича намунавий технологик карталар. 2022-2026 йиллар. 1-Қисм. – Тошкент, 2022. –545 б.

Протокол №26-21-88 (8075200) Государственных приемочных испытаний опытного образса ссепки борон СН-8. –СредазМИС, 1988. –44 б.

Протокол №26-17-89 (8075200) Государственных приемочных испытаний опытного образса агрегата бороновального АБН-8,5. –СредазМИС, 1989. – 48 б.

To‘xtaqo‘ziyev A, Nietullaev A. Tirma-g‘altakmola // Yuqori samarali qishloq xo‘jalik mashinalarini yaratish va texnika vositalaridan foydalanish darajasini oshirishning innovatsion yechimlari: Xalqaro ilmiy – texnik konferensiyasi ilmiy maqolalar to‘plami. – Gulbahor, 2025. –53-55 b.

ЎзДСт 3412:2019 «Қишлоқ хўжалиги техникасини синаш. Тупроқ юзасига ишлов берувчи машиналар ва қуроллар». – Тошкент, 2019. – 54 б.

ЎзДСт 3193:2017 «Қишлоқ хўжалиги техникасини синаш. Машиналарни энергетик баҳолаш усуллари». – Тошкент, 2017. – 21 б.